Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove bolts - 3 - and pressure reservoir - 2 -.
Front pressure reservoir, installing on underbody
Installation is performed in the reverse order of removal. Observe the following when doing so:
Tightening specifications, refer to => [ Air Supply Unit and Solenoid Valve Block Assembly Overview ] See: Compressor/Pump/Service and
Repair/Air Supply Unit and Solenoid Valve Block Assembly Overview.
-
Place vehicle on wheels. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Service and Repair/Procedures/Positioning Vehicle on
Hoist and Wheels.