Q7 Quattro V6-3.6L (BHK) (2007)
-
Remove brake hose with bracket from wheel bearing housing.
-
Turn wheel hub far enough until one of the holes for wheel bolts is on top.
-
Install (T10149) with wheel bolt on wheel hub.
-
Support wheel bearing housing over (T10149) with (V.A.G 1383 A).
CAUTION!
‹› Do not lift or lower vehicle with engine/transmission jack below vehicle.
‹› Do not leave (V.A.G 1383 A) below vehicle any longer than necessary.
-
Remove nut from upper control arm and press arm off.