Q7 Quattro V6-3.6L (BHK) (2007)
/Page-5461003.png)
-
Lightly tension upper control arm with (VW 552)
-
Remove screws - 1 - to - 3 -.
-
Turn wheel hub far enough until one of the holes for wheel bolts is on top.
-
Install (T10149) with wheel bolt on wheel hub.
-
Support wheel bearing housing over (T10149) with (V.A.G 1383 A).
CAUTION!
‹› Do not lift or lower vehicle with (V.A.G 1383 A) below vehicle.
