Q7 Quattro V6-3.6L (BHK) (2007)
5
Cover cap
‹› Inserted in oil pan opening
6
Magnet
‹› Ensure full surface contact
‹› Clean before installation
7
Oil pan seal
‹› Always replace
8
Oil filter
‹› => [ ATF Filter ] See: ATF Filter
9
Bolt
‹› 8 Nm
‹› Note different lengths
‹› Following removal and installation instructions => [ Mechatronic Unit ] See: Valve Body/Service and Repair/Mechatronic Unit
10
Mechatronic unit
‹› => [ Mechatronic Unit ] See: Valve Body/Service and Repair/Mechatronic Unit
11
Connector housing
12
Sealing element