Q7 Quattro V6-3.6L (BHK) (2007)
CAUTION!
Selector shaft lever must not be bent when pressing selector lever cable on, counterhold if necessary.
-
Carefully press selector lever cable - 2 - off selector shaft lever.
-
Secure selector lever cable sleeve to bracket with new securing clip - 1 -.
-
Carefully insert boot - arrow - all around in selector mechanism shift unit.
-
Install shift mechanism function unit => [ Selector Mechanism Unit ] See: Shifter A/T/Service and Repair/Removal and Replacement/Selector
Mechanism Unit.