Q7 Quattro V6-3.6L (BHK) (2007)
Shifter A/T: Removal and Replacement
Selector Shaft Lever
Selector Shaft Lever
Special tools, testers and auxiliary items required
‹› Pry lever (80-200)
Removing:
-
Remove screws and remove rear noise insulation - 2 -.
-
Pry out selector lever cable ball head - 2 - from selector shaft lever using Pry Lever (80-200).
-
Drive out roll pin - 1 - at selector shaft lever - 2 - in direction indicated - arrow - until selector shaft lever can be pulled off selector shaft.