Q7 Quattro V6-3.6L (BHK) (2007)
/Page-3572005.png)
‹› Shift gate selector lever in "S" position (as shown in illustration).
-
Insert microswitch - B - in shift gate and secure it with retaining pins - A -.
‹› Microswitch must lie flush on all sides.
-
Engage electrical line in tab - arrow C -.
-
Slide both axial bearings - 2 - onto shift gate - 1 -.
-
Place both shift bearings - 3 - on shift gate.
-
Slide shift gate into function unit housing. If necessary, press emergency release lever - arrow - down to guide shift gate in.
-
Press in lower bearing - 1 - on both sides.
