Q7 Quattro V6-3.6L (BHK) (2007)
/Page-3616004.png)
-
Then tighten bolts to tightening torque in specified sequence - 1 to 10 -.
-
Replace connector housing - A -.
-
Lightly coat O-rings - 1 - and seals - 2 - on new connector housing - A - with ATF.
-
Press connector housing - A - into transmission as far as stop - arrow 1 -, rotate slightly if necessary.
-
Press locking lever into transmission - arrow 2 - and let it engage.
