Q7 Quattro V6-3.6L (BHK) (2007)
-
Secure slide hammer VW 771 to right flange shaft.
-
Pull out right drive flange.
-
Pull out sealing ring for flange shaft using slide hammer-complete set VW 771 and additional part for VW771 VW 771/37.
Installing
-
Coat outer edge of gasket with axle oil.
-
Drive in new seal up to stop.
-
Fill area between sealing lip and dust lip halfway with sealing grease G 052 128 A1.
Before installing flange shaft, check dust cap for damage. Replace dust cap if necessary.
-
Remove old circlip - A - from groove in flange shaft using pliers.