Q7 Quattro V6-3.6L (BHK) (2007)
‹› Shift gate selector lever in "S" position (as shown in illustration).
-
Insert microswitch - B - in shift gate and secure it with retaining pins - A -.
‹› Microswitch must lie flush on all sides.
-
Engage electrical line in tab - arrow C -.
‹› Retaining screws - A - secure microswitch - B - in shift gate.
‹› Ignition key removal lock does not function correctly if microswitch is not inserted correctly or properly secured.
-
Secure electrical line - arrow A - at selector mechanism according to illustration.