Q7 Quattro V6-3.6L (BHK) (2007)
Power Window Switch: Service and Repair
Power Window Control Head (In Drivers Door) E512, Removing and Installing
Power Window Control Head (in Drivers Door) E512, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove front door trim.
Vehicles with 2-zone climate control:
-
Detach insulating mat from door trim.
-
Disengage air channel - 1 - on door trim - arrows -.
Vehicles with 4-zone climate control:
-
Remove insulation mat - 3 - from door trim.
All:
-
Disconnect connectors - 1 - and - 2 -.
-
Remove screws - arrows -.