Q7 Quattro V6-3.6L (BHK) (2007)
/Page-9239001.png)
Window Shade: Service and Repair
Sun Shade, Removing and Installing
Sun Shade, Removing And Installing
Removing
-
Switch off ignition and remove ignition key.
-
Remove door trim.
-
Remove insulation in upper area from door trim.
-
Carefully release guide strip - 2 - at left and right with a small screwdriver.
-
Pull sun shade - 1 - out of door trim slightly and remove guide strip from door trim.
NOTE: Ignore - arrow -.
-
Remove screws - 1 to 5 - and - 7 to 9 -.
-
Remove sun shade - 6 - by lightly tipping outward - arrow - out of door trim.
Installing
Installation is reverse of removal. Observe the following when doing so:
