Q7 Quattro V6-3.6L (BHK) (2007)
Wiper Blade: Service and Repair
Windshield Wiper Blades
Removing
‹› If the windshield wiper motor is to be run during the work procedure, the hood must be closed, otherwise the voltage supply of the wiper motor
will be interrupted.
-
With ignition switched on, bring windshield wiper into service position via "MMI terminal".
-
Switch off ignition.
-
Lift off wiper arm from front windshield.
-
Compress clip - arrows 1 -.
-
Push wiper blade off wiper arm - arrow 2 -.
-
Remove wiper blade.
Installing
Install in reverse order of removal, observing the following:
-
Guide wiper arm tab - 2 - into wiper blade - 1 - - arrow -.
-
Switch ignition on and activate "one-touch wiping", the wipers then leave the "service position".