Q7 Quattro V8-4.2L (BAR) (2008)
/Page-2805002.png)
Front belt tensioner:
-
Read measuring value block display group 001:
You can recognize deployed belt tensioners by display "too great".
Rear belt tensioner (equipment level):
-
Read measuring value block display group 002:
You can recognize deployed belt tensioners by display "too great".
B - with replaced airbag control module:
-
Connect a suitable vehicle diagnostic tool, e.g. Vehicle Diagnosis, Testing and Information System VAS 5051 B and tap "15 - airbag" in vehicle
system selection. Ignition must be switched on.
-
Retrieve DTC memory:
You can recognized deployed belt tensioners by malfunction message "Belt tensioner - resistance value too great".
-
If needed (visual inspection), the following must also be replaced: All damaged components.
After replacing airbag units or control module, affix stickers (only tear-off strips) to registration card and return registration card to relevant Sales Center
or to Importer for registration.
