Q7 Quattro V8-4.2L (BAR) (2008)
Arm/Disarm Switch: Service and Repair
Passenger Compartment Monitoring Switch and Alarm System -Off- Switch
Removing
-
Switch off ignition and remove ignition key.
-
Carefully pry panel - 1 - out of door trim - arrow - using a small screwdriver.
-
Unplug connector.
-
Carefully release catches - arrows - using a small screwdriver.
-
Remove Passenger Compartment Monitoring Switch E183 and Alarm System -Off- Switch E217 - item 1 - toward rear out of panel - 2 -.
Installing
Install in reverse order.