Q7 Quattro V8-4.2L (BAR) (2008)
Shift Cable: Adjustments
Selector Lever Cable, Adjusting
Special tools, testers and auxiliary items required
‹› Socket and key (T40031)
Procedure
-
Unclip mounting frame for selector lever boot - 1 - from the center console and lift it upward and off - arrows -.
-
Place selector lever in position "S".
‹› Clamping screw is only accessible in selector lever position " S".
‹› Loosen locking screw approximately 1 turn - do not remove completely
-
Loosen selector lever cable clamping screw approximately 1 turn using Socket (T40031).