Q7 Quattro V8-4.2L (BAR) (2008)
‹› Apply primer D 009 200 02 with applicator D 009 500 24 with a streak over entire viewing window.
‹› After drying time of 10 minutes, prime surface completely again.
‹› Distance to roof dimension - a - = 2 mm + +1mm, align side distances.
‹› Part numbers are for reference only. Always check with your Parts Department for the latest part number information
4
Adhesive sealing material
‹› Observe curing times.
‹› Note varying spacing dimensions to window edge.
5
Spacer
Removing protective piping for grip channel
-
Pull off protective piping from grip channel only after installing window.
-
Before installing plenum chamber cover, protective piping - 1 - must be pulled out of grip channel - 2 - of windshield - 3 -.