R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Cruise Control Switch: Service and Repair
Turn Signal Switch, Cruise Control Switch
Removing
-
Remove steering angle sensor (G85). Refer to => [ Steering Angle Sensor ] See: Sensors and Switches/Sensors and Switches - Steering and
Suspension/Sensors and Switches - Steering/Steering Angle Sensor/Service and Repair.
‹› To provide a better illustration, the following steps are shown with the steering column switch module removed.
-
Release retaining clips with 1.0 mm feeler gauge - item 1 - - arrows - and remove left lever switch.
Installing
Install in reverse order of removal, observing the following:
-
Make sure all fasteners and electrical connectors are properly engaged.