R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Fuel Injector: Service and Repair
Intake Manifold Lower Section, Fuel Rail and Fuel Injectors Assembly Overview
Intake Manifold Lower Section, Fuel Rail and Fuel Injectors Assembly Overview
‹› The illustration shows the intake manifold lower section for the left cylinder bank 2 cylinder head.
1
Seals
‹› Replace
2
Intake Manifold Lower Section
‹› With intake manifold flap vacuum actuator
‹› Removing and installing, refer to => [ Intake Manifold, Lower Section, with Fuel Rail ] See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold, Lower Section, With Fuel Rail
‹› Check the vacuum system for leaks, refer to => [ Vacuum System, Checking ] See: Testing and Inspection/Component Tests and General
Diagnostics/Vacuum System, Checking
3
Bolt
‹› 2.5 Nm
4
Intake Manifold Runner Position Sensor
‹› Cylinder bank 1 (right) intake manifold runner position sensor (G336)