R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Headlamp Control Module: Service and Repair
HID Lamp Control Module
HID Lamp Control Module
CAUTION!
Danger to life due to high voltage.
‹› Headlamps must be adjusted after performing measures that could influence headlamp adjustment. Refer to => [ Headlamps, Checking and
Adjusting ] See: Lighting and Horns/Headlamp/Adjustments.
Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] See: Lighting and Horns/Service Precautions.
Removing
-
Remove headlamp. Refer to => [ HID Headlamp Housing ] See: Lighting and Horns/Headlamp/Service and Repair/Removal and
Replacement/HID Headlamp Housing.
-
Remove screws - arrows -.
-
Remove control module - 1 - from headlamp housing.
-
Disconnect electrical connectors - 2 and 3 -.
-
Remove the HID headlamp control module.
Installing