R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Power Distribution Module: Service and Repair
Vehicle Electrical System Control Module
Removing
-
If the control module was replaced, select the Replace function for the respective control module in Guided Fault Finding or Guided Functions.
-
Switch off ignition and remove ignition key.
-
Remove the passenger side footwell cover.
-
Remove the bolt - A - and footwell vent air duct - B -.
-
Remove the nuts - 3 and 4 - and bolt - 1 -.
-
Remove the passenger footwell relay carrier and fuse panel baseplate - 2 - - arrow -.