R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-87003.png)
Continuation for All
-
Remove nuts - 1 -.
-
Disconnect connector - 2 - and remove control module.
Installing
Installation is performed in the reverse order of removal.
-
If Tire Pressure Monitoring Control Module (J502) is replaced, system must be coded. Refer to => [ Control Module Access, Replacing or Coding
with VAS 5051B ] See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and Inspection/Control Module
Access, Replacing or Coding With VAS 5051B.
