R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Repair/Windshield Washer System Assembly Overview.
Install in reverse order of removal, observing the following:
-
Insert the wiper motor - B - with the wiper frame into the vehicle.
-
Connect the electrical connector - A -.
-
Tighten the bolts - 1, 2 and 3 - in the sequence shown.
-
Install the trim
-
Adjust wiper arms. Refer to => [ Windshield Wiper Arms, Adjusting ] See: Wiper and Washer Systems/Wiper Arm/Adjustments.