R8 Quattro Coupe V10-5.2L (BUJ) (2010)
/Page-1143002.png)
-
Slide joint protective boot onto drive axle.
Protective boot and boot seat on drive axle must be free of grease.
-
Before installing joint or triple roller star, splines - A - must be lightly coated with grease used in joint.
-
Insert sealing ring in groove on shaft.
-
Apply 30 g joint grease in the inside of the joint.
-
Slide on CV joint up to sealing ring.
-
Align sealing ring at center with opening upward - see arrows -.
-
Screw old drive axle screw into joint as shown in the illustration.
