R8 Quattro Coupe V10-5.2L (BUJ) (2010)
‹› Dimension - a - = 19.5 mm
‹› Dimension - c - = 13.5 mm.
‹› Dimension - d - = 13.5 mm
3
Lower window frame
4
Cowl panel trim retaining strip
‹› Component of windshield
‹› No replacement part
‹› With a new windshield, remove the protective pipe before installing the cowl panel trim.
5
Cowl panel trim
‹› Insert in the retaining strip - item 4 -.
‹› Only press on as far as the stop after the minimum curing time for the adhesive has elapsed.
6
Upper window frame
7
Cover profile
‹› At the sides and top of the windshield
‹› Replace if reusing the undamaged windshield => [ Cover profile ] See: Windshield.
8
Side window frame
‹› To the left and right A-pillars
9
Sealing lip
‹› For the label with the VIN
10
Label
‹› With the VIN
11
Bracket
‹› For the label with the VIN
12
Adjusting wedge
‹› For securing the windshield during installation => [ Slide the adjusting wedges in at both places provided between the body and
retaining strip to keep the windshield at the same height. ] See: Windshield