R8 Quattro Coupe V8-4.2L (BYH) (2009)
Tire Pressure Monitor Antenna: Service and Repair
Tire Pressure Monitoring Antenna
Removing
The right front tire pressure monitoring antenna (R60) is on the right front longitudinal member on the outer side.
The right rear tire pressure monitoring antenna (R62) is on the right rear longitudinal member on the outer side.
-
Unclip rear tire pressure monitoring antenna - 1 -.
-
Disconnect the connector from the antenna.
-
Remove antenna - 1 -.
Installing
Installation is performed in the reverse order of removal.
-
If the right front tire pressure monitoring antenna (R60) or right rear tire pressure monitoring antenna (R62) is replaced, the system must be coded.
Refer to => [ Control Module Access, Replacing or Coding with VAS 5051B ] See: Instrument Panel, Gauges and Warning Indicators/Tire
Monitoring System/Testing and Inspection/Control Module Access, Replacing or Coding With VAS 5051B.