RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Integrated Accessory Switch Assembly: Service and Repair
Switch In Center Console, Removing And Installing
Removing
-
Disengage storage compartment on both sides -arrow 1 - and remove storage compartment from instrument panel toward rear -arrow 2-.
-
Position a small, flat screwdriver on switch at top.
-
Carefully pry out the respective switch from switch mount -arrows-.
-
Unplug harness connector.
Installing
Installation is reverse of removal, paying attention to the following:
-
Connect harness connector.
-
Press switch into recess in instrument panel and engage.