RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-2939001.png)
Navigation Function Selector Switch: Service and Repair
Function Selector Switch II
Function Selector Switch II-E272-, Removing And Installing
Removing
-
Pull up parking brake lever.
-
Unclip cover -2- below the parking brake lever at mounting springs -1-.
-
Grasp opening below parking brake lever and press Convertible Top Operation Switch/navigation out of center console from bottom -arrows-.
-
Disconnect electrical harness connectors -3 to 6-.
-
Carefully release catches -arrows- using a small screwdriver.
-
Remove Function Selector Switch II position 1 from mounting frame -2-
Installing
Installation is the reverse of removal.