RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Radio/Stereo: Service and Repair
"Symphony II" Radio, Removing and Installing
"Symphony II" Radio, Removing And Installing
Special Tools and Equipment
-
T10057 radio removal tool
Removing
-
Push the four clips of radio removal tool T10057 into the front.
-
Pull the radio out of the instrument panel.
-
Unplug the connectors and the antenna wire.
-
Pull out the release tool from the radio - to do this, press in the locking tabs at the top and bottom on the radio.
Installing
-
Plug in the connectors and the antenna wire.
-
Carefully insert the radio into the instrument panel and let it engage in the installation slot.
-
Perform coding if the radio was replaced.
Do this using vehicle diagnostic, testing and information system VAS 5051.