RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3119002.png)
10
-
Expanding nut
Disengaging Bowden cable for interior door handle
-
Pull Bowden cable - 2 - out of guide - 1 -.
-
Detach hook - 3 -.
NOTE: When installing, make sure hook - 3 - is facing upward.
Disconnecting connector at window regulator control unit
-
Detach catch - 2 -.
-
Disconnect connector - 3 - from control unit - 1 - in direction of - arrow -.
Replacing door trim securing clip
-
Press retainer tab - 2 - and pull out clip - 1 - in direction of arrow.