RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Trunk / Liftgate Hinge: Service and Repair
Rear Lid Hinge, Removing and Installing
Rear Lid Hinge, Removing And Installing
NOTE: For easier adjustment of the rear lid hinges, use gradations marked on the hinges.
-
Loosen nut - 1 -.
-
Unscrew nut - 2 -.
-
Lift off lid from hinge.
-
3 - Height adjusting screw
-
Remove bolts - 4 - and - 6 -.
-
Only loosen center bolt - 5 -.
-
Remove hinge - 7 -.
-
Installation is reverse of removal.
-
1 - Nut (21 Nm)
-
2 - Nut (21 Nm)
-
4 - Screw (21 Nm)
-
5 - Screw (21 Nm)
-
6 - Screw (21 Nm)