RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3207001.png)
Body Emblem: Service and Repair
Rear Lid Lettering
Dimensional data for front-wheel drive vehicles
NOTE: Outer edges of rear lid and lines extending from lower rear lights are used as reference edges.
1 - Name plate
-
Installation:
-
Warm vehicle and type designation to room temperature.
-
Bonding surfaces must be dry and free from dust and grease.
-
Clean outer panel with mineral spirits, treat with silicone remover and rub dry.
-
pull off backing paper and press on characters, maintaining pressure for approx. 3 seconds.
-
- a - = 30 mm.
-
- b - = 28 mm.
-
- c - = 36 mm.
-
- d - = 28 mm.
-
- e - = 152 mm.
Dimensional data for All Wheel Drive (AWD) vehicles
NOTE: Outer edges of rear lid and lines extending from lower rear lights are used as reference edges.
