RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3273001.png)
Glove Compartment: Service and Repair
Damping Mechanism For Glove Compartment Lid, Removing and Installing
Damping Mechanism For Glove Compartment Lid, Removing and Installing
Special tools and workshop equipment required
-
Front end hook 3370
Removing
-
Open glove compartment.
-
Remove right instrument panel cover - arrow - using front end hook 3370.
-
Disconnect connector - 2 -.
-
Remove joint pin - 1 -.
-
Unlock glove compartment lid damping mechanism - 3 - in clockwise direction and remove.
NOTE: Shown in illustration with glove box removed.
Installing
-
Installation is in reverse order of removal.