RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-3282002.png)
-
Guide headliner cord through rubber hose - 1 - and re-engage it at pull-spring - 2 -.
-
Slide sheathing - 3 - over pull-spring - 2 -.
-
Guide a cable tie through slit - arrow - present on sheathing - 3 - and tighten it.
-
Close convertible top until bracket is vertical (on stop) and convertible top compartment cover is closed.
NOTE: Cover convertible top compartment cover and side panel to protect against paint damage.
-
Remove molding - 1 - from bracket.
-
Remove rivet - 2 -.
-
Separate sewn seam - 3 - on torn off mounting strap and remove "old strap".
-
Lay mounting strap from repair kit flush on convertible top headliner - arrows - and sew with a double seam.
NOTE: Before sewing, ensure strap is positioned correctly on headliner to avoid a twisted seam.
-
Secure strap to convertible top frame with accompanying rivet - arrow -.
-
Install inner headline molding on bracket.
-
Perform function test.