RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Trim Panel: Service and Repair
Upper A-Pillar Trim, Removing and Installing
Upper A-pillar Trim, Removing and Installing
1
-
Upper A-pillar trim
Removing
-
Remove windshield trim.
-
Unclip lower A-pillar trim in upper area.
-
Pry out upper A-pillar trim - 1 - at clips - 2 - (3x).
-
Detach upper A-pillar trim - 1 -.
Removing
-
When installing, ensure that rubber door surround is in full contact with upper A-pillar trim - 1 -.
-
Install upper A-pillar trim - 1 - in reverse order of removal.
2
-
Clips (3x)