RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
On assembly, section - 4 - must be positioned with guide rails - 3 - on rubber buffers at bottom.
-
Ensure that microswitch on right side is not crushed. For this pull section - 4 - slightly upward.
-
Press section - 4 - back down again.
-
The toothed segment - 5 - must be horizontal when folding together. Fold sections in lowest position together.
-
In folded position, push guide rail outer section - 3 - upward and engage it in tabs.
-
Carry out remainder of installation in reverse order of removal.