RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove bolts - 1 - (4x) on both sides.
-
Tightening torque 2 Nm
-
Pull sections - 1 - and - 4 - apart upward.
-
Pry guide rails - 3 - out of catch of section - 1 -.
-
Separate sections - 1 - and - 4 -.
-
Release holder - 1 - at rear.
-
Pry out holder - 1 - using a flat screwdriver..
-
Always replace holder - 1 -.
-
Remove toothed segment - 2 -.
-
Detach Bowden cable - 3 -.
Installing
Toothed segment with Bowden cable for right side.