RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Installing
-
Place hydraulic line with connecting piece through connecting plate.
-
Place Hydraulic Line Connect Tool 3335 sleeve - 1 - over connecting piece.
-
Slide spring washer - 2 - onto sleeve and press it on completely with Hydraulic Line Connect Tool 3335.
NOTE: Spring washer - 2 - must slide completely over collar on connecting piece - 1 -.
-
Coat sealing ring - 3 - with hydraulic oil and slide it onto connecting piece.
Hydraulic pump connection table
Connections shown from hose side out.
1 - Main drive motor hydraulic cylinder
11 - Left piston rod side
12 - Left piston side
13 - Right piston rod side
14 - Right piston side