RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3579001.png)
Seat Heater: Removal and Replacement
Backrest Heating Element, Removing and Installing
Backrest Heating Element, Removing and Installing
Removing:
-
Remove seat.
-
Remove backrest.
-
Remove cover and padding from backrest.
-
Cut wire - 3 - off of old heating element - 1 -.
Installing:
-
Align heating element - 1 - on backrest surface, remove protective foil and glue heating element to cushion.
-
Insert electrical wire - 3 - into gap - 4 -.
-
Lay wire connections without crossing into bottom of openings at positions - 2 -.