RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
‹› The repair kit includes four self locking bolts which must be installed in all cases.
-
Secure the brake caliper housing with the new self locking bolts.
-
Make sure not to twist the brake hose when installing.
-
Tighten the bolts on the brake caliper housing, 35 Nm.
-
Install the brake cable.
‹› After each brake pad change firmly depress the brake pedal several times with the vehicle stationary, so that the brake pads are properly seated in
their normal operating position.
Install the wheels and tires.
-
Check the brake fluid level and top off if necessary.