RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Disconnect the vacuum hose - 2 -.
-
Remove the bolt - 1 - for the brake fluid reservoir.
‹› Protect the plenum chamber against any leaking brake fluid.
‹› The underside of the brake fluid reservoir clips into the brake master cylinder.
-
To remove the reservoir, press the locking tab down and at the same time, remove the brake fluid reservoir from the sealing plugs.
-
Remove the brake fluid reservoir and lay it to one side.
-
Disconnect the brake lines - 1 - and - 2 - and seal with sealing plugs from sealing plug repair kit (1H0 698 311 A).