RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Clip the cable into the retainers provided.
-
The clip loop on the retainer must be located between the two positioning rings - 4 -.
-
Tighten bolt - 2 -. Tightening specification: 25 Nm
-
Secure the parking brake cables to the underside and the fuel tank.
‹› Do not damage the parking brake boot when removing and installing.
-
Hook the parking brake cable into the brake caliper and insert the retaining clip - 1 -.
-
Positioning rings - 1 - should be on the inner side of the clips on the retainer.