RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1708002.png)
-
Unclip the brake cables - 1 - from the retainers - 2 - and - 4 -.
Before installing new parking brake cables you must remove the parking brake lever and reset the mechanism.
Removing and installing parking brake lever. Refer to => [ Parking Brake Handle ] See: Parking Brake Lever/Service and Repair/Parking Brake
Handle.
Installing
-
Clip on the parking brake cable - 1 - until it engages.
