RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Loosen wiper arms - 2 - one after another by tilting wiper axles slightly.
-
Remove nuts completely and remove wiper arms.
‹› If wiper arm cannot be removed in this way, use a standard puller.
-
Disconnect securing clips - 1 - and remove cowl grille - 5 -.
-
Remove cover for E-Box in plenum chamber - arrows -.
-
Using a screwdriver, carefully pry off mounting bracket - arrow - and remove Engine Control Module (ECM) from E-Box.
‹› Engine Control Module (ECM) remains connected at wiring harness.
-
Release retaining hooks - arrows - toward outside and remove retaining bracket.