RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove coolant pump - 2 - from housing - 1 -.
Installing
‹› Replace seals and O-rings.
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Insert new O-rings - 1 - and - 3 -.
-
Insert coolant pump input shaft - 2 - in oil pump mount as far as stop at engine.
-
Slide the coolant pump into the mounts on the upper section of the oil pan and the guide frame while sliding the coolant hose - 1 - onto the front
coolant pipe.