RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-748002.png)
CAUTION!
To prevent valves from contacting pistons during the following steps, crankshaft must be turned so that no pistons are in "TDC" position.
-
Insert the Adapter (T40058) guide pins as follows:
‹› Small diameter - arrow 1 - points to engine.
‹› Large diameter - arrow 2 - points to socket.
-
Rotate crankshaft with Socket (T40058) opposite engine rotation direction 40° out of "TDC" position - arrow -.
