RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Piston: Locations
Piston and connecting rod, assembly overview
Note:
^
Oil injector jet for piston cooling
1 - Connecting rod bolt, 40 Nm plus an additional 90 degrees (1/4 turn)
^
Replace
^
Lubricate threads and contact surface
^
Tighten to 40 Nm to measure radial play, do not turn further
2 - Connecting rod bearing cap
^
Do not interchange
^
Mark affiliation to cylinder with paint
^
Installation position of connecting rod pairs
3 - Bearing shells
^
Check that retaining tabs are secured
^
Do not interchange used bearing shells (mark, but not on running surface)
^
Radial clearance, measuring
^
To measure radial play, tighten bolt -1- to 40 Nm but no further
^
Over-sized bearings are available for reworked crankshaft connecting rod journals
^
Insert bearing shells with correct color marking.
4 - Connecting rod
^
Only replace as set
^
Mark affiliation to cylinder with paint
^
Installation position of connecting rod pairs