RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Replace O-ring -2- as well as oil filter insert -3-.
-
Tighten cover -arrow-.
-
Open oil drain plug or extract engine oil.
-
Install oil drain plug with new gasket.
-
Fill the engine oil.
Tightening Specifications
Oil filter cover ......................................................................................................................................................................................................... 25 Nm
Oil drain plug .......................................................................................................................................................................................................... 50 Nm
Note:
-
Check for cleanliness.
4.2 FSI (RS4)
-
Remove engine cover upward.
-
Loosen screws -1- and unclip line -2-.
-
Lay aside bracket.