RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove the clamp - 4 - on the engine oil cooler.
-
Remove the union nuts - 2 - and - 7 - on the engine oil cooler.
-
Remove nuts - 1, 3, 5, 6 -.
-
Remove engine oil cooler.
Installing
Installation is in reverse order of removal, note the following:
-
Install bumper impact absorber.
-
Install front bumper cover.
-
Check oil level.
Tightening Specifications