RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
![background image](/audi/rs_4_quattro_cabriolet/v8-4.2l_(bns)/Page-836003.png)
-
Clean the sealing surfaces, they must be free of oil and grease.
‹› Note the expiration date of the sealing compound.
-
Cut tube nozzle at front marking (nozzle dia. approximately 2 mm).
-
Apply sealant bead - arrows - on clean sealing surface of lower section of oil pan as shown in illustration.
‹› Thickness of sealant bead: 2.5 mm.
‹› Observe the position of the sealant bead at areas indicated with - arrows -.